Product Description
MFG by: SciGrip (IPS Corp.)
Contianer Size: (4 fl oz U.S.)
SCIGRIP 3* is a water-thin, non-flammable cement formulated to quickly develop high strength, clear bonds to many thermoplastic substrates, particularly acrylic. The bond is achieved by first softening the surfaces to be joined and then fusing them together with dissipation of the solvent. The initial bond forms within a few minutes and quickly increases in strength. Substantial strength will be obtained within only a few hours. Under certain conditions, especially with high humidity, a white mark on the plastic (commonly called blushing) may sometimes be encountered. Where a more blush resistant cement and longer open time is required, SCIGRIP 4 is recommended.
Bonding Recommendations
SCIGRIP 3 is used extensively in sign fabrication. Strong butt joints are made with flat sheets by using the soak method for such applications as cementing letters to acrylic panels. Butyrate trim-capping of acrylics is another highly recommended use for SCIGRIP 3. It is also widely used in the POP industry (e.g. display), and in the fabrication and bonding of plastic containers, housewares, bottles and many other applications using the capillary method.
Substrate Recommendations
SCIGRIP® 3 is formulated for cementing acrylic (poly-methyl methacrylate) plastic to itself. It will also form strong bonds with other thermoplastics such as polystyrene, CAB (cellulose acetate butyrate), PETG (polyethylene terephthalate glycol) and polycarbonate to themselves. It is not recommended for cross-linked acrylic.
Weld-On is a product of Scigrip (Formerly IPS).
| Color | Num. of Components | Typical Specific Gravity | Minimum Expected Shelf Life @ 73° F (yr) | Typical Viscosity (cps) | Meets SCAQMD Rule 1168 VOC Emissions Levels |
|---|---|---|---|---|---|
| Clear | 1 | 1.33 | 2 | Water-Thin | Yes |
Can Not Be shipped AIR due to ORM-D Regulations
