Product Description
Set of TwoMaterial: Fiberglass
DROP SHIPS FROM THE MANUFACTURER
| As an owner of one of the finest aircraft available, you probably wonder if it could get any better. Well, it was tough to do but it has been done. The Met-Co-Aire, Inc. Hoerner wing tip adds performance and improves the appearance of an already beautiful bird. The lines are simple but effective. If you have any doubt just ask Beech, it is standard equipment on their "S" models and the beautiful V35 series. Our design reduces drag while smoothing the airflow along the wing and control surfaces. By minimizing the vortices caused by the wing and actually having them start later our tip gives performance increases without the usual penalties. We CAN get increases in climb and in cruise. We CAN reduce stall without adversely affecting handling. You may not think youÂ’re taking off from a carrier, but you may think you took out a new plane. Our tips installed on your aircraft will: All Met-Co-Aire products are constructed of hand laid up, aircraft grade fiberglass in a polyester resin matrix. They come covered with a white gel-coat that serves as a primer for painting. Our Bonanza tips come with both FAA STC and PMA approvals and are covered by our Three Star Guarantee: Increased performance. Best product quality. Lowest price! Â | |
| Part Number: | 11052 Â Â Â |
| Approval Basis: | Supplemental Type Certificate No(s) SA998WE |
| Replaces: | Â |
| Aircraft Eligibility: | B50, C50, D50, D50A, D50B, E50, F50, G50, 35, A35, B35, C35, D35, E35, F35, G35, H35, J35, K35, M35, N35, P35, R35 (S/N D25R1 only), S35, 35-33, and 35-A33 |
| Typical Lead Time: | 4-7 Days |
| Â | Â |
| Finish: | White Primer, ready for paint |
